Let’s Stay Home in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let’s Stay Home” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.5 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 17: 13 outer edges and 4 cut-outs |
| Cut length | 700 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 243 curve and line segments |
Measured from the file. PNG: 2,000 × 812 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.38 mm | 178 mm | 200 | Too fine for most machines |
| 2 × 0.76 in (51 × 19 mm) | 0.76 mm | 356 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.15 in (76 × 29 mm) | 1.1 mm | 533 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.53 in (102 × 39 mm) | 1.5 mm | 711 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.29 in (152 × 58 mm) | 2.3 mm | 1,067 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.06 in (203 × 78 mm) | 3 mm | 1,422 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.58 in (305 × 116 mm) | 4.6 mm | 2,134 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let’s Stay Home SVG files
-
Let’s Stay Home in Amatic SC Solid · 13 pieces
-
Let’s Stay Home in block capitals Solid · 13 pieces
-
Let’s Stay Home in script and capitals Solid · 11 pieces
-
Let’s Stay Home with hearts Solid · 14 pieces
-
Let’s Stay Home outline lettering Outline · 14 pieces
-
Let’s Stay Home stencil plate Solid · one piece
-
Let’s Stay Home with a drop shadow Layered · 10 pieces
-
Let’s Stay Home with a little house Solid · 12 pieces
← Let’s Stay Home in Lilita One All 13 Let’s Stay Home designs Let’s Stay Home in Amatic SC →