Let It Snow Somewhere Else outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let It Snow Somewhere Else” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 25 mm (3.94 × 0.99 in), scales to any size |
|---|---|
| Pieces | 22 separate pieces |
| Outlines to cut | 62: 22 outer edges and 40 cut-outs |
| Cut length | 1,031 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 649 curve and line segments |
Measured from the file. PNG: 2,000 × 562 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.25 in (25 × 6 mm) | 0.25 mm | 262 mm | 270 | Too fine for most machines |
| 2 × 0.5 in (51 × 13 mm) | 0.51 mm | 524 mm | 85 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.76 in (76 × 19 mm) | 0.76 mm | 786 mm | 36 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.01 in (102 × 26 mm) | 1 mm | 1,047 mm | 20 | Vinyl, card and thin sheet |
| 6 × 1.51 in (152 × 38 mm) | 1.5 mm | 1,571 mm | 7 | Vinyl, card and thin sheet |
| 8 × 2.02 in (203 × 51 mm) | 2 mm | 2,095 mm | 5 | Vinyl, card and thin sheet |
| 12 × 3.02 in (305 × 77 mm) | 3 mm | 3,142 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow Somewhere Else SVG files
-
Let It Snow Somewhere Else stencil plate Solid · one piece
-
Let It Snow Somewhere Else with a drop shadow Layered · 10 pieces
-
Let It Snow Somewhere Else with a snowflake Solid · 19 pieces
-
Let It Snow Somewhere Else in Pacifico Solid · 8 pieces
-
Let It Snow Somewhere Else in Lobster Solid · 7 pieces
-
Let It Snow Somewhere Else in Lilita One Solid · 22 pieces
-
Let It Snow Somewhere Else in Amatic SC Solid · 22 pieces
-
Let It Snow Somewhere Else in block capitals Solid · 22 pieces
← Let It Snow Somewhere Else with stars All 11 Let It Snow Somewhere Else designs Let It Snow Somewhere Else stencil plate →