Let It Snow Somewhere Else in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let It Snow Somewhere Else” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 27 mm (3.94 × 1.05 in), scales to any size |
|---|---|
| Pieces | 22 separate pieces |
| Outlines to cut | 29: 22 outer edges and 7 cut-outs |
| Cut length | 789 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 355 curve and line segments |
Measured from the file. PNG: 2,000 × 588 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.27 in (25 × 7 mm) | 0.43 mm | 200 mm | 260 | Too fine for most machines |
| 2 × 0.53 in (51 × 14 mm) | 0.86 mm | 401 mm | 80 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.8 in (76 × 20 mm) | 1.3 mm | 601 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.06 in (102 × 27 mm) | 1.7 mm | 802 mm | 18 | Vinyl, card and thin sheet |
| 6 × 1.6 in (152 × 41 mm) | 2.6 mm | 1,202 mm | 6 | Vinyl, card and thin sheet |
| 8 × 2.13 in (203 × 54 mm) | 3.5 mm | 1,603 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.19 in (305 × 81 mm) | 5.2 mm | 2,405 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow Somewhere Else SVG files
-
Let It Snow Somewhere Else in Amatic SC Solid · 22 pieces
-
Let It Snow Somewhere Else in block capitals Solid · 22 pieces
-
Let It Snow Somewhere Else in script and capitals Solid · 18 pieces
-
Let It Snow Somewhere Else with stars Solid · 13 pieces
-
Let It Snow Somewhere Else outline lettering Outline · 22 pieces
-
Let It Snow Somewhere Else stencil plate Solid · one piece
-
Let It Snow Somewhere Else with a drop shadow Layered · 10 pieces
-
Let It Snow Somewhere Else with a snowflake Solid · 19 pieces
← Let It Snow Somewhere Else in Lobster All 11 Let It Snow Somewhere Else designs Let It Snow Somewhere Else in Amatic SC →