Free Leo SVG

Leo lion in a ring of stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leo lion in a ring of stars, as a solid black shape — Leo lion in a ring of stars. The preview is the SVG file itself.

The lion of Leo on a floor inside a ring that carries twelve stars, one for each sign of the zodiac. One welded piece about 100 mm across, for a wall hanging or a round sign.

What is in the file

Size	100 × 97 mm (3.94 × 3.83 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,048 mm at this size
Narrowest part	1.5 mm at this size
Nodes	376 curve and line segments

Measured from the file. PNG: 2,000 × 1,950 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.97 in (25 × 25 mm)	0.38 mm	266 mm	100	Too fine for most machines
2 × 1.95 in (51 × 49 mm)	0.76 mm	532 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.92 in (76 × 74 mm)	1.1 mm	799 mm	9	Vinyl, card and thin sheet
4 × 3.9 in (102 × 99 mm)	1.5 mm	1,065 mm	4	Vinyl, card and thin sheet
6 × 5.84 in (152 × 148 mm)	2.3 mm	1,597 mm	2	Vinyl, card and thin sheet
8 × 7.79 in (203 × 198 mm)	3 mm	2,130 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.69 in (305 × 297 mm)	4.6 mm	3,194 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Leo SVG files

← Leo lion in a crescent moon All 13 Leo designs Leo constellation →