Free Leo SVG

Leo lion silhouette SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leo lion silhouette, as a solid black shape
Leo lion silhouette. The preview is the SVG file itself.

The lion of Leo as a solid shape, standing side on with a shaggy mane that covers the chest, a lean body and a tufted tail held high. The four paws are cut level, so it stands on a flat base.

What is in the file

Size100 × 76 mm (3.94 × 2.97 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length521 mm at this size
Narrowest part2.6 mm at this size
Nodes206 curve and line segments

Measured from the file. PNG: 2,000 × 1,529 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.66 mm132 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.51 in (51 × 38 mm)1.3 mm265 mm35Vinyl, card and thin sheet
3 × 2.26 in (76 × 58 mm)2 mm397 mm12Vinyl, card and thin sheet
4 × 3.02 in (102 × 77 mm)2.6 mm529 mm6Vinyl, card and thin sheet
6 × 4.53 in (152 × 115 mm)4 mm794 mm2Any material, including 3 mm wood and acrylic
8 × 6.04 in (203 × 153 mm)5.3 mm1,059 mm1Any material, including 3 mm wood and acrylic
12 × 9.06 in (305 × 230 mm)7.9 mm1,588 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Leo SVG files

← Leo glyph in a ring All 13 Leo designs Leo lion line drawing →