Free lemon SVG

Split lemon for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Split lemon for a name, as a solid black shape
Split lemon for a name. The preview is the SVG file itself.

A lemon and its leaf cut across the middle with a clear band between the halves for a name. It comes as two pieces: the top with a leaf on its shoulder, and the bottom.

What is in the file

Size100 × 97 mm (3.94 × 3.82 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length577 mm at this size
Narrowest part1.1 mm at this size
Nodes58 curve and line segments

Measured from the file. PNG: 2,000 × 1,944 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.28 mm147 mm100Too fine for most machines
2 × 1.94 in (51 × 49 mm)0.56 mm293 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.91 in (76 × 74 mm)0.84 mm440 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.88 in (102 × 99 mm)1.1 mm586 mm4Vinyl, card and thin sheet
6 × 5.83 in (152 × 148 mm)1.7 mm879 mm2Vinyl, card and thin sheet
8 × 7.77 in (203 × 197 mm)2.2 mm1,172 mm1Vinyl, card and thin sheet
12 × 11.65 in (305 × 296 mm)3.4 mm1,759 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lemon SVG files

← Lemon wreath All 17 lemons Glass of lemonade →