Free lawn mower SVG

Lawn mower outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lawn mower outline, drawn as a line
Lawn mower outline. The preview is the SVG file itself.

The walk-behind mower as a line drawing: one even line round the deck, the engine, the handle, the bag and both wheels, with the hubs drawn in. One piece, for colouring sheets, foil and pen plotters.

What is in the file

Size100 × 82 mm (3.94 × 3.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,223 mm at this size
Narrowest part1.5 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 1,644 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.38 mm311 mm120Too fine for most machines
2 × 1.63 in (51 × 41 mm)0.76 mm621 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.44 in (76 × 62 mm)1.1 mm932 mm12Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)1.5 mm1,243 mm6Vinyl, card and thin sheet
6 × 4.89 in (152 × 124 mm)2.3 mm1,864 mm2Vinyl, card and thin sheet
8 × 6.52 in (203 × 166 mm)3 mm2,485 mm1Any material, including 3 mm wood and acrylic
12 × 9.78 in (305 × 248 mm)4.6 mm3,728 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lawn mower SVG files

← Lawn mower blades, crossed All 12 lawn mowers Layered riding lawn mower in four colours →