Split laurel for a name SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The classic laurel with a clear band across the middle, held between two fine bars that run the full width. Set a name in the band and the bars keep the whole frame in one piece.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.67 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 1,414 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 310 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,869 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.51 mm | 359 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.86 in (51 × 47 mm) | 1 mm | 718 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.8 in (76 × 71 mm) | 1.5 mm | 1,077 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.73 in (102 × 95 mm) | 2 mm | 1,437 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.59 in (152 × 142 mm) | 3 mm | 2,155 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.46 in (203 × 189 mm) | 4.1 mm | 2,873 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.18 in (305 × 284 mm) | 6.1 mm | 4,310 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More laurel SVG files
-
Laurel with a crown Solid · one piece -
Laurel with a star Solid · one piece -
Laurel with a blank ribbon banner Solid · one piece -
Laurel divider with a star Solid · one piece -
Laurel outline with hollow leaves Outline · one piece -
Laurel corner embellishment Solid · one piece -
Layered laurel in five colours Layered · 51 pieces -
Classic laurel with crossed stems Solid · one piece
← Monogram laurel with a ring All 20 laurels Laurel with a crown →