Free laurel SVG

Laurel divider with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Laurel divider with a star. The preview is the SVG file itself.

Two sprigs growing outwards from a five-pointed star, each with six pairs of leaves that shrink towards the tip, on stems that dip a little at the ends. A rule between a heading and the text below.

What is in the file

Size	100 × 20 mm (3.94 × 0.78 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	549 mm at this size
Narrowest part	1.9 mm at this size
Nodes	188 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 458 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.2 in (25 × 5 mm)	0.48 mm	139 mm	300	Too fine for most machines
2 × 0.4 in (51 × 10 mm)	0.97 mm	279 mm	100	Fine detail: vinyl and paper only, weed with care
3 × 0.59 in (76 × 15 mm)	1.4 mm	418 mm	45	Vinyl, card and thin sheet
4 × 0.79 in (102 × 20 mm)	1.9 mm	558 mm	24	Vinyl, card and thin sheet
6 × 1.19 in (152 × 30 mm)	2.9 mm	837 mm	8	Vinyl, card and thin sheet
8 × 1.58 in (203 × 40 mm)	3.9 mm	1,116 mm	6	Any material, including 3 mm wood and acrylic
12 × 2.38 in (305 × 60 mm)	5.8 mm	1,673 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More laurel SVG files

← Laurel with a blank ribbon banner All 20 laurels Laurel outline with hollow leaves →