Free laurel SVG

Laurel leaf sprig of three SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Laurel leaf sprig of three, as a solid black shape
Laurel leaf sprig of three. The preview is the SVG file itself.

Three large bay leaves on one stalk, one upright and one leaning out each side, each with its midrib and six side veins cut through. A kitchen and herb garden motif.

What is in the file

Size96 × 100 mm (3.76 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length1,022 mm at this size
Narrowest part1.9 mm at this size
Nodes135 curve and line segments

Measured from the file. PNG: 1,915 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.48 mm260 mm100Too fine for most machines
1.91 × 2 in (49 × 51 mm)0.97 mm519 mm25Fine detail: vinyl and paper only, weed with care
2.87 × 3 in (73 × 76 mm)1.4 mm779 mm9Vinyl, card and thin sheet
3.82 × 4 in (97 × 102 mm)1.9 mm1,038 mm6Vinyl, card and thin sheet
5.74 × 6 in (146 × 152 mm)2.9 mm1,558 mm2Vinyl, card and thin sheet
7.65 × 8 in (194 × 203 mm)3.9 mm2,077 mm1Any material, including 3 mm wood and acrylic
11.47 × 12 in (291 × 305 mm)5.8 mm3,115 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More laurel SVG files

← Laurel leaves in a wide U All 20 laurels Half laurel for the left side →