Free lantern SVG

Lantern outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lantern outline, drawn as a line
Lantern outline. The preview is the SVG file itself.

The candle lantern as a line drawing, with the candle and flame in outline inside the window. For colouring pages, foil and pen plotters.

What is in the file

Size53 × 100 mm (2.09 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length873 mm at this size
Narrowest part2.4 mm at this size
Nodes134 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,100 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (14 × 25 mm)0.61 mm222 mm160Fine detail: vinyl and paper only, weed with care
1.06 × 2 in (27 × 51 mm)1.2 mm443 mm45Vinyl, card and thin sheet
1.6 × 3 in (41 × 76 mm)1.8 mm665 mm18Vinyl, card and thin sheet
2.13 × 4 in (54 × 102 mm)2.4 mm887 mm10Vinyl, card and thin sheet
3.19 × 6 in (81 × 152 mm)3.7 mm1,330 mm3Any material, including 3 mm wood and acrylic
4.26 × 8 in (108 × 203 mm)4.9 mm1,774 mm2Any material, including 3 mm wood and acrylic
6.38 × 12 in (162 × 305 mm)7.3 mm2,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lantern SVG files

← Candle lantern All 13 lanterns Storm lantern with a wire handle →