Free lantern SVG

Candle lantern SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Candle lantern, as a solid black shape
Candle lantern. The preview is the SVG file itself.

A metal candle lantern seen from the front: a ring to hang it by, a sloping roof, four posts round one open window, a stepped base and a candle with its flame. The candle stands on the base, so it is all one piece.

What is in the file

Size53 × 100 mm (2.09 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length560 mm at this size
Narrowest part2.9 mm at this size
Nodes79 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,100 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (14 × 25 mm)0.74 mm142 mm160Fine detail: vinyl and paper only, weed with care
1.06 × 2 in (27 × 51 mm)1.5 mm284 mm45Vinyl, card and thin sheet
1.6 × 3 in (41 × 76 mm)2.2 mm427 mm18Vinyl, card and thin sheet
2.13 × 4 in (54 × 102 mm)2.9 mm569 mm10Vinyl, card and thin sheet
3.19 × 6 in (81 × 152 mm)4.4 mm853 mm3Any material, including 3 mm wood and acrylic
4.26 × 8 in (108 × 203 mm)5.9 mm1,138 mm2Any material, including 3 mm wood and acrylic
6.38 × 12 in (162 × 305 mm)8.8 mm1,707 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lantern SVG files

← Valentine paper lantern pattern with hearts All 13 lanterns Lantern outline →