Layered yellow Labrador face in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack: a pale yellow head, deeper yellow ears, the dark eyes, brows, nose and mouth, and a pink tongue on top. Cut each from its own sheet of card or vinyl.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.84 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 11: 9 outer edges and 2 cut-outs |
| Cut length | 823 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 181 curve and line segments |
| Layers | 4: head, ears, eyes, nose and mouth and tongue |
Measured from the file. PNG: 2,000 × 1,465 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | Over 1.5 mm | 209 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.44 in (51 × 37 mm) | Over 3 mm | 418 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.17 in (76 × 55 mm) | Over 4.6 mm | 627 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.89 in (102 × 73 mm) | Over 6.1 mm | 836 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.33 in (152 × 110 mm) | Over 9.1 mm | 1,254 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.78 in (203 × 147 mm) | Over 12 mm | 1,672 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.66 in (305 × 220 mm) | Over 18 mm | 2,509 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Labrador SVG files
-
Layered chocolate Labrador with a ball Layered · 7 pieces -
Labrador silhouette standing Solid · one piece -
Labrador face Solid · one piece -
Labrador retriever sitting Solid · one piece -
Labrador lying down Solid · one piece -
Labrador head in side view Solid · one piece -
Labrador puppy sitting Solid · one piece -
Black Labrador with a bandana Solid · one piece
← Peeking Labrador All 15 Labradors Layered chocolate Labrador with a ball →