Free Jesus Loves This Hot Mess SVG

Jesus Loves This Hot Mess stencil plate SVG

Jesus Loves This Hot Mess stencil plate, as a solid black shape
Jesus Loves This Hot Mess stencil plate. The preview is the SVG file itself.

A rounded plate with “JESUS LOVES THIS HOT MESS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 46 mm (3.94 × 1.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length1,144 mm at this size
Narrowest part1.1 mm at this size
Nodes369 curve and line segments

Measured from the file. PNG: 2,000 × 954 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.28 mm291 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.56 mm581 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.37 in (76 × 35 mm)0.84 mm872 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.82 in (102 × 46 mm)1.1 mm1,162 mm12Vinyl, card and thin sheet
6 × 2.74 in (152 × 69 mm)1.7 mm1,743 mm4Vinyl, card and thin sheet
8 × 3.65 in (203 × 93 mm)2.2 mm2,325 mm3Vinyl, card and thin sheet
12 × 5.47 in (305 × 139 mm)3.4 mm3,487 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves This Hot Mess SVG files

← Jesus Loves This Hot Mess outline lettering All 12 Jesus Loves This Hot Mess designs Jesus Loves This Hot Mess with a drop shadow →