Free Jesus Loves This Hot Mess SVG

Jesus Loves This Hot Mess in Alfa Slab One SVG

Jesus Loves This Hot Mess in Alfa Slab One, as a solid black shape
Jesus Loves This Hot Mess in Alfa Slab One. The preview is the SVG file itself.

“Jesus Loves This Hot Mess” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 27 mm (3.94 × 1.05 in), scales to any size
Pieces5 separate pieces
Outlines to cut15: 5 outer edges and 10 cut-outs
Cut length590 mm at this size
Narrowest part2.3 mm at this size
Nodes403 curve and line segments

Measured from the file. PNG: 2,000 × 590 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.27 in (25 × 7 mm)0.58 mm150 mm260Fine detail: vinyl and paper only, weed with care
2 × 0.53 in (51 × 14 mm)1.2 mm300 mm80Vinyl, card and thin sheet
3 × 0.8 in (76 × 20 mm)1.8 mm450 mm36Vinyl, card and thin sheet
4 × 1.07 in (102 × 27 mm)2.3 mm599 mm18Vinyl, card and thin sheet
6 × 1.6 in (152 × 41 mm)3.5 mm899 mm6Any material, including 3 mm wood and acrylic
8 × 2.14 in (203 × 54 mm)4.7 mm1,199 mm5Any material, including 3 mm wood and acrylic
12 × 3.2 in (305 × 81 mm)7 mm1,798 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus Loves This Hot Mess SVG files

← Jesus Loves This Hot Mess in Lilita One All 12 Jesus Loves This Hot Mess designs Jesus Loves This Hot Mess in Amatic SC →