Free Illinois SVG

Illinois with its name beneath SVG

Illinois with its name beneath, as a solid black shape — Illinois with its name beneath. The preview is the SVG file itself.

The solid state with “ILLINOIS” in narrow capitals under it. The letters of “Illinois” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	47 × 100 mm (1.84 × 3.94 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	10: 9 outer edges and 1 cut-out
Cut length	540 mm at this size
Narrowest part	1.9 mm at this size
Nodes	291 curve and line segments

Measured from the file. PNG: 975 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.47 × 1 in (12 × 25 mm)	0.48 mm	137 mm	180	Too fine for most machines
0.93 × 2 in (24 × 51 mm)	0.97 mm	274 mm	50	Fine detail: vinyl and paper only, weed with care
1.4 × 3 in (36 × 76 mm)	1.4 mm	411 mm	21	Vinyl, card and thin sheet
1.87 × 4 in (47 × 102 mm)	1.9 mm	549 mm	10	Vinyl, card and thin sheet
2.8 × 6 in (71 × 152 mm)	2.9 mm	823 mm	4	Vinyl, card and thin sheet
3.74 × 8 in (95 × 203 mm)	3.9 mm	1,097 mm	3	Any material, including 3 mm wood and acrylic
5.6 × 12 in (142 × 305 mm)	5.8 mm	1,646 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Illinois SVG files

← Illinois cut from a heart All 10 Illinois designs Split Illinois for a name →