Free I Like a Little Dirt on My Diamonds SVG

Dirt on My Diamonds in Lobster SVG

Dirt on My Diamonds in Lobster, as a solid black shape
Dirt on My Diamonds in Lobster. The preview is the SVG file itself.

“I Like a Little Dirt on My Diamonds” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces18 separate pieces
Outlines to cut27: 18 outer edges and 9 cut-outs
Cut length1,437 mm at this size
Narrowest part0.9 mm at this size
Nodes749 curve and line segments

Measured from the file. PNG: 2,000 × 1,417 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.23 mm365 mm130Too fine for most machines
2 × 1.39 in (51 × 35 mm)0.46 mm730 mm35Too fine for most machines
3 × 2.09 in (76 × 53 mm)0.69 mm1,095 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.79 in (102 × 71 mm)0.91 mm1,460 mm8Fine detail: vinyl and paper only, weed with care
6 × 4.18 in (152 × 106 mm)1.4 mm2,190 mm2Vinyl, card and thin sheet
8 × 5.58 in (203 × 142 mm)1.8 mm2,920 mm2Vinyl, card and thin sheet
12 × 8.36 in (305 × 212 mm)2.7 mm4,380 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Like a Little Dirt on My Diamonds SVG files

← Dirt on My Diamonds in Pacifico All 10 I Like a Little Dirt on My Diamonds designs Dirt on My Diamonds in Lilita One →