Free I Like a Little Dirt on My Diamonds SVG

Dirt on My Diamonds in Amatic SC SVG

Dirt on My Diamonds in Amatic SC, as a solid black shape
Dirt on My Diamonds in Amatic SC. The preview is the SVG file itself.

“I Like a Little Dirt on My Diamonds” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 84 mm (3.94 × 3.31 in), scales to any size
Pieces28 separate pieces
Outlines to cut36: 28 outer edges and 8 cut-outs
Cut length1,975 mm at this size
Narrowest part1.4 mm at this size
Nodes912 curve and line segments

Measured from the file. PNG: 2,000 × 1,692 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.36 mm502 mm110Too fine for most machines
2 × 1.68 in (51 × 43 mm)0.71 mm1,003 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.52 in (76 × 64 mm)1.1 mm1,505 mm12Vinyl, card and thin sheet
4 × 3.36 in (102 × 85 mm)1.4 mm2,007 mm6Vinyl, card and thin sheet
6 × 5.04 in (152 × 128 mm)2.1 mm3,010 mm2Vinyl, card and thin sheet
8 × 6.72 in (203 × 171 mm)2.8 mm4,013 mm1Vinyl, card and thin sheet
12 × 10.08 in (305 × 256 mm)4.3 mm6,020 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Like a Little Dirt on My Diamonds SVG files

← Dirt on My Diamonds in Lilita One All 10 I Like a Little Dirt on My Diamonds designs Dirt on My Diamonds in block capitals →