Two Titles Mom and Nana stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “I HAVE TWO TITLES MOM AND NANA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 25: 1 outer edge and 24 cut-outs |
| Cut length | 1,661 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 461 curve and line segments |
Measured from the file. PNG: 2,000 × 1,594 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.36 mm | 422 mm | 120 | Too fine for most machines |
| 2 × 1.58 in (51 × 40 mm) | 0.71 mm | 844 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.37 in (76 × 60 mm) | 1.1 mm | 1,266 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.16 in (102 × 80 mm) | 1.4 mm | 1,688 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.73 in (152 × 120 mm) | 2.1 mm | 2,531 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.31 in (203 × 160 mm) | 2.8 mm | 3,375 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.47 in (305 × 240 mm) | 4.3 mm | 5,063 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Mom and Nana SVG files
-
Two Titles Mom and Nana with a drop shadow Layered · 12 pieces -
Two Titles Mom and Nana in Pacifico Solid · 8 pieces -
Two Titles Mom and Nana in Lobster Solid · 14 pieces -
Two Titles Mom and Nana in Kaushan Script Solid · 25 pieces -
Two Titles Mom and Nana in Lilita One Solid · 25 pieces -
Two Titles Mom and Nana in Alfa Slab One Solid · 7 pieces -
Two Titles Mom and Nana in Amatic SC Solid · 24 pieces -
Two Titles Mom and Nana in block capitals Solid · 24 pieces
← Two Titles Mom and Nana outline lettering All 12 I Have Two Titles Mom and Nana designs Two Titles Mom and Nana with a drop shadow →