Two Titles Mom and Nana in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Have Two Titles Mom and Nana” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.78 in), scales to any size |
|---|---|
| Pieces | 25 separate pieces |
| Outlines to cut | 34: 25 outer edges and 9 cut-outs |
| Cut length | 962 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 383 curve and line segments |
Measured from the file. PNG: 2,000 × 944 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | 0.41 mm | 244 mm | 180 | Too fine for most machines |
| 2 × 0.9 in (51 × 23 mm) | 0.81 mm | 489 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.35 in (76 × 34 mm) | 1.2 mm | 733 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.8 in (102 × 46 mm) | 1.6 mm | 977 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.71 in (152 × 69 mm) | 2.4 mm | 1,466 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.61 in (203 × 92 mm) | 3.3 mm | 1,955 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.41 in (305 × 137 mm) | 4.9 mm | 2,932 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Have Two Titles Mom and Nana SVG files
-
Two Titles Mom and Nana in Alfa Slab One Solid · 22 pieces
-
Two Titles Mom and Nana in Amatic SC Solid · 24 pieces
-
Two Titles Mom and Nana in block capitals Solid · 24 pieces
-
Two Titles Mom and Nana in script and capitals Solid · 21 pieces
-
Two Titles Mom and Nana with hearts Solid · 20 pieces
-
Two Titles Mom and Nana outline lettering Outline · 27 pieces
-
Two Titles Mom and Nana stencil plate Solid · one piece
-
Two Titles Mom and Nana with a drop shadow Layered · 15 pieces
← Two Titles Mom and Nana in Kaushan Script All 13 I Have Two Titles Mom and Nana designs Two Titles Mom and Nana in Alfa Slab One →