Patience Tested I’m Negative stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “I HAD MY PATIENCE TESTED I’M NEGATIVE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 32: 1 outer edge and 31 cut-outs |
| Cut length | 1,533 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 553 curve and line segments |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.25 mm | 389 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.51 mm | 779 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2 in (76 × 51 mm) | 0.76 mm | 1,168 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.66 in (102 × 68 mm) | 1 mm | 1,558 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.99 in (152 × 101 mm) | 1.5 mm | 2,336 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.32 in (203 × 135 mm) | 2 mm | 3,115 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.98 in (305 × 203 mm) | 3 mm | 4,673 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Had My Patience Tested I’m Negative SVG files
-
Patience Tested I’m Negative with a drop shadow Layered · 20 pieces -
Patience Tested I’m Negative in Pacifico Solid · 13 pieces -
Patience Tested I’m Negative in Lobster Solid · 17 pieces -
Patience Tested I’m Negative in Lilita One Solid · 33 pieces -
Patience Tested I’m Negative in Amatic SC Solid · 31 pieces -
Patience Tested I’m Negative in block capitals Solid · 31 pieces -
Patience Tested I’m Negative in script and capitals Solid · 28 pieces -
Patience Tested I’m Negative with stars Solid · 23 pieces
← Patience Tested I’m Negative outline lettering All 10 I Had My Patience Tested I’m Negative designs Patience Tested I’m Negative with a drop shadow →