Patience Tested I’m Negative in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Had My Patience Tested I’m Negative” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 47 mm (3.94 × 1.83 in), scales to any size |
|---|---|
| Pieces | 33 separate pieces |
| Outlines to cut | 46: 33 outer edges and 13 cut-outs |
| Cut length | 1,142 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 506 curve and line segments |
Measured from the file. PNG: 2,000 × 973 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.47 in (25 × 12 mm) | 0.41 mm | 290 mm | 180 | Too fine for most machines |
| 2 × 0.93 in (51 × 24 mm) | 0.81 mm | 580 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.4 in (76 × 36 mm) | 1.2 mm | 870 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.86 in (102 × 47 mm) | 1.6 mm | 1,160 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.8 in (152 × 71 mm) | 2.4 mm | 1,740 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.73 in (203 × 95 mm) | 3.3 mm | 2,321 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.59 in (305 × 142 mm) | 4.9 mm | 3,481 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Had My Patience Tested I’m Negative SVG files
-
Patience Tested I’m Negative in Amatic SC Solid · 31 pieces
-
Patience Tested I’m Negative in block capitals Solid · 31 pieces
-
Patience Tested I’m Negative in script and capitals Solid · 28 pieces
-
Patience Tested I’m Negative with stars Solid · 18 pieces
-
Patience Tested I’m Negative outline lettering Outline · 33 pieces
-
Patience Tested I’m Negative stencil plate Solid · one piece
-
Patience Tested I’m Negative with a drop shadow Layered · 20 pieces
-
Patience Tested I’m Negative with a star Solid · 29 pieces
← Patience Tested I’m Negative in Lobster All 11 I Had My Patience Tested I’m Negative designs Patience Tested I’m Negative in Amatic SC →