Free I Do My Own Stunts SVG

I Do My Own Stunts in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do My Own Stunts in Alfa Slab One, as a solid black shape
I Do My Own Stunts in Alfa Slab One. The preview is the SVG file itself.

“I Do My Own Stunts” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 32 mm (3.94 × 1.27 in), scales to any size
Pieces14 separate pieces
Outlines to cut17: 14 outer edges and 3 cut-outs
Cut length777 mm at this size
Narrowest part1.9 mm at this size
Nodes277 curve and line segments

Measured from the file. PNG: 2,000 × 698 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.48 mm197 mm230Too fine for most machines
2 × 0.65 in (51 × 16 mm)0.97 mm395 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.97 in (76 × 25 mm)1.4 mm592 mm30Vinyl, card and thin sheet
4 × 1.29 in (102 × 33 mm)1.9 mm789 mm16Vinyl, card and thin sheet
6 × 1.94 in (152 × 49 mm)2.9 mm1,184 mm5Vinyl, card and thin sheet
8 × 2.58 in (203 × 66 mm)3.9 mm1,579 mm4Any material, including 3 mm wood and acrylic
12 × 3.88 in (305 × 98 mm)5.8 mm2,368 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do My Own Stunts SVG files

← I Do My Own Stunts in Lilita One All 13 I Do My Own Stunts designs I Do My Own Stunts in Amatic SC →