Free I Do My Own Stunts SVG

I Do My Own Stunts with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do My Own Stunts with stars, as a solid black shape
I Do My Own Stunts with stars. The preview is the SVG file itself.

“I Do My Own Stunts” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 80 mm (3.94 × 3.16 in), scales to any size
Pieces16 separate pieces
Outlines to cut19: 16 outer edges and 3 cut-outs
Cut length1,242 mm at this size
Narrowest part1 mm at this size
Nodes499 curve and line segments

Measured from the file. PNG: 2,000 × 1,619 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)0.25 mm315 mm120Too fine for most machines
2 × 1.6 in (51 × 41 mm)0.51 mm631 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.41 in (76 × 61 mm)0.76 mm946 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.21 in (102 × 81 mm)1 mm1,262 mm6Vinyl, card and thin sheet
6 × 4.81 in (152 × 122 mm)1.5 mm1,893 mm2Vinyl, card and thin sheet
8 × 6.42 in (203 × 163 mm)2 mm2,524 mm1Vinyl, card and thin sheet
12 × 9.62 in (305 × 244 mm)3 mm3,786 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do My Own Stunts SVG files

← I Do My Own Stunts in script and capitals All 12 I Do My Own Stunts designs I Do My Own Stunts outline lettering →