Free I Do Crew SVG

I Do Crew with a drop shadow SVG

I Do Crew with a drop shadow, in layered colours
I Do Crew with a drop shadow. The preview is the SVG file itself.

“I Do Crew” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size92 × 100 mm (3.6 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut14: 8 outer edges and 6 cut-outs
Cut length1,597 mm at this size
Narrowest part6 mm at this size
Nodes422 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)1.5 mm406 mm100Vinyl, card and thin sheet
1.83 × 2 in (46 × 51 mm)3 mm811 mm30Any material, including 3 mm wood and acrylic
2.74 × 3 in (70 × 76 mm)4.6 mm1,217 mm12Any material, including 3 mm wood and acrylic
3.66 × 4 in (93 × 102 mm)6.1 mm1,623 mm6Any material, including 3 mm wood and acrylic
5.49 × 6 in (139 × 152 mm)9.1 mm2,434 mm2Any material, including 3 mm wood and acrylic
7.32 × 8 in (186 × 203 mm)12 mm3,245 mm1Any material, including 3 mm wood and acrylic
10.98 × 12 in (279 × 305 mm)18 mm4,868 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do Crew SVG files

← I Do Crew stencil plate All 12 I Do Crew designs I Do Crew in Pacifico →