Free I Do Crew SVG

I Do Crew in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do Crew in Lobster, as a solid black shape
I Do Crew in Lobster. The preview is the SVG file itself.

“I Do Crew” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size86 × 100 mm (3.39 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut7: 5 outer edges and 2 cut-outs
Cut length956 mm at this size
Narrowest part1.8 mm at this size
Nodes156 curve and line segments

Measured from the file. PNG: 1,731 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)0.46 mm243 mm110Too fine for most machines
1.72 × 2 in (44 × 51 mm)0.91 mm486 mm30Fine detail: vinyl and paper only, weed with care
2.58 × 3 in (66 × 76 mm)1.4 mm728 mm12Vinyl, card and thin sheet
3.44 × 4 in (87 × 102 mm)1.8 mm971 mm6Vinyl, card and thin sheet
5.16 × 6 in (131 × 152 mm)2.7 mm1,457 mm2Vinyl, card and thin sheet
6.88 × 8 in (175 × 203 mm)3.7 mm1,943 mm1Any material, including 3 mm wood and acrylic
10.32 × 12 in (262 × 305 mm)5.5 mm2,914 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do Crew SVG files

← I Do Crew in Pacifico All 13 I Do Crew designs I Do Crew in Kaushan Script →