Free I Am Fearfully and Wonderfully Made SVG

Fearfully and Wonderfully Made with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fearfully and Wonderfully Made with a drop shadow, in layered colours
Fearfully and Wonderfully Made with a drop shadow. The preview is the SVG file itself.

“I Am Fearfully and Wonderfully Made” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 60 mm (3.94 × 2.36 in), scales to any size
Pieces12 separate pieces
Outlines to cut40: 12 outer edges and 28 cut-outs
Cut length2,163 mm at this size
Narrowest part3.2 mm at this size
Nodes957 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,229 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.81 mm549 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.2 in (51 × 30 mm)1.6 mm1,099 mm40Vinyl, card and thin sheet
3 × 1.8 in (76 × 46 mm)2.4 mm1,648 mm18Vinyl, card and thin sheet
4 × 2.4 in (102 × 61 mm)3.3 mm2,198 mm8Any material, including 3 mm wood and acrylic
6 × 3.59 in (152 × 91 mm)4.9 mm3,296 mm3Any material, including 3 mm wood and acrylic
8 × 4.79 in (203 × 122 mm)6.5 mm4,395 mm2Any material, including 3 mm wood and acrylic
12 × 7.19 in (305 × 183 mm)9.8 mm6,593 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Am Fearfully and Wonderfully Made SVG files

← Fearfully and Wonderfully Made stencil plate All 11 I Am Fearfully and Wonderfully Made designs Fearfully and Wonderfully Made with a cross →