Free I Am Fearfully and Wonderfully Made SVG

Fearfully and Wonderfully Made in Lilita One SVG

Fearfully and Wonderfully Made in Lilita One, as a solid black shape
Fearfully and Wonderfully Made in Lilita One. The preview is the SVG file itself.

“I Am Fearfully and Wonderfully Made” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 40 mm (3.94 × 1.58 in), scales to any size
Pieces13 separate pieces
Outlines to cut19: 13 outer edges and 6 cut-outs
Cut length915 mm at this size
Narrowest part0.8 mm at this size
Nodes598 curve and line segments

Measured from the file. PNG: 2,000 × 850 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.2 mm232 mm200Too fine for most machines
2 × 0.8 in (51 × 20 mm)0.41 mm465 mm60Too fine for most machines
3 × 1.21 in (76 × 31 mm)0.61 mm697 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.61 in (102 × 41 mm)0.81 mm930 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.41 in (152 × 61 mm)1.2 mm1,394 mm4Vinyl, card and thin sheet
8 × 3.22 in (203 × 82 mm)1.6 mm1,859 mm3Vinyl, card and thin sheet
12 × 4.82 in (305 × 123 mm)2.4 mm2,789 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Am Fearfully and Wonderfully Made SVG files

← Fearfully and Wonderfully Made in Lobster All 10 I Am Fearfully and Wonderfully Made designs Fearfully and Wonderfully Made in Amatic SC →