Free Ho Ho Ho SVG

Ho Ho Ho in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ho Ho Ho in Pacifico, as a solid black shape
Ho Ho Ho in Pacifico. The preview is the SVG file itself.

“Ho Ho Ho” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 77 mm (3.94 × 3.02 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length778 mm at this size
Narrowest part2.5 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 1,552 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 19 mm)0.64 mm198 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)1.3 mm395 mm35Vinyl, card and thin sheet
3 × 2.3 in (76 × 58 mm)1.9 mm593 mm12Vinyl, card and thin sheet
4 × 3.07 in (102 × 78 mm)2.5 mm790 mm6Vinyl, card and thin sheet
6 × 4.6 in (152 × 117 mm)3.8 mm1,186 mm2Any material, including 3 mm wood and acrylic
8 × 6.14 in (203 × 156 mm)5.1 mm1,581 mm1Any material, including 3 mm wood and acrylic
12 × 9.2 in (305 × 234 mm)7.6 mm2,371 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ho Ho Ho SVG files

← Ho Ho Ho with a Santa hat All 13 Ho Ho Ho designs Ho Ho Ho in Lobster →