Free Ho Ho Ho SVG

Ho Ho Ho in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ho Ho Ho in Alfa Slab One, as a solid black shape
Ho Ho Ho in Alfa Slab One. The preview is the SVG file itself.

“Ho Ho Ho” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 62 mm (3.94 × 2.45 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length705 mm at this size
Narrowest part4.2 mm at this size
Nodes123 curve and line segments

Measured from the file. PNG: 2,000 × 1,273 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)1.1 mm179 mm140Vinyl, card and thin sheet
2 × 1.24 in (51 × 32 mm)2.1 mm358 mm40Vinyl, card and thin sheet
3 × 1.87 in (76 × 47 mm)3.2 mm537 mm15Any material, including 3 mm wood and acrylic
4 × 2.49 in (102 × 63 mm)4.3 mm716 mm8Any material, including 3 mm wood and acrylic
6 × 3.73 in (152 × 95 mm)6.4 mm1,074 mm3Any material, including 3 mm wood and acrylic
8 × 4.98 in (203 × 126 mm)8.5 mm1,433 mm2Any material, including 3 mm wood and acrylic
12 × 7.46 in (305 × 190 mm)13 mm2,149 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ho Ho Ho SVG files

← Ho Ho Ho in Lilita One All 13 Ho Ho Ho designs Ho Ho Ho in Amatic SC →