Free hippo SVG

Mother hippo and baby SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mother hippo and baby, as a solid black shape
Mother hippo and baby. The preview is the SVG file itself.

A mother hippo with her calf standing in front of her, both facing the same way. They overlap at the legs, so the pair cut as one piece for nursery prints and new baby cards.

What is in the file

Size100 × 45 mm (3.94 × 1.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length374 mm at this size
Narrowest part1 mm at this size
Nodes251 curve and line segments

Measured from the file. PNG: 2,000 × 935 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.25 mm95 mm180Too fine for most machines
2 × 0.89 in (51 × 23 mm)0.51 mm190 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.34 in (76 × 34 mm)0.76 mm285 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.78 in (102 × 45 mm)1 mm380 mm12Vinyl, card and thin sheet
6 × 2.68 in (152 × 68 mm)1.5 mm570 mm4Vinyl, card and thin sheet
8 × 3.57 in (203 × 91 mm)2 mm760 mm3Vinyl, card and thin sheet
12 × 5.35 in (305 × 136 mm)3 mm1,140 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hippo SVG files

← Baby hippo calf All 13 hippos Hippo in a tutu →