Free hippo SVG

Hippo face from the front SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hippo face from the front, as a solid black shape
Hippo face from the front. The preview is the SVG file itself.

A hippo looking straight at you: small ears, two eyes on raised bumps, a very wide muzzle with big nostrils, a long smile, two square teeth and whisker dots. Exactly symmetrical.

What is in the file

Size89 × 100 mm (3.51 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length786 mm at this size
Narrowest part1.9 mm at this size
Nodes230 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,792 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.48 mm200 mm110Too fine for most machines
1.78 × 2 in (45 × 51 mm)0.97 mm399 mm30Fine detail: vinyl and paper only, weed with care
2.68 × 3 in (68 × 76 mm)1.4 mm599 mm12Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)1.9 mm799 mm6Vinyl, card and thin sheet
5.35 × 6 in (136 × 152 mm)2.9 mm1,198 mm2Vinyl, card and thin sheet
7.14 × 8 in (181 × 203 mm)3.9 mm1,597 mm1Any material, including 3 mm wood and acrylic
10.7 × 12 in (272 × 305 mm)5.8 mm2,396 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hippo SVG files

← Layered yawning hippo in five colours All 13 hippos Hippo silhouette →