Free hippie SVG

Hippie flower outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hippie flower outline, drawn as a line
Hippie flower outline. The preview is the SVG file itself.

The six-petalled flower as an even line: the scalloped edge, a ring for the middle with the peace bars inside it, and a short line between each pair of petals. For colouring and foil.

What is in the file

Size92 × 100 mm (3.62 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,146 mm at this size
Narrowest part2.4 mm at this size
Nodes144 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,846 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.61 mm291 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.2 mm582 mm25Vinyl, card and thin sheet
2.76 × 3 in (70 × 76 mm)1.8 mm873 mm12Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)2.4 mm1,164 mm6Vinyl, card and thin sheet
5.52 × 6 in (140 × 152 mm)3.7 mm1,747 mm2Any material, including 3 mm wood and acrylic
7.36 × 8 in (187 × 203 mm)4.9 mm2,329 mm1Any material, including 3 mm wood and acrylic
11.04 × 12 in (280 × 305 mm)7.3 mm3,493 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hippie SVG files

← Hippie set of six symbols All 16 hippie designs Layered hippie flower in four colours →