Free highland cow SVG

Highland cow in a Christmas hat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Highland cow in a Christmas hat, as a solid black shape
Highland cow in a Christmas hat. The preview is the SVG file itself.

The Highland cow face in a Father Christmas hat that sits between the horns and flops to one side, with a bobble on the end and a cut line along its fur band. For jumpers, cards and tea towels.

What is in the file

Size100 × 86 mm (3.94 × 3.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,187 mm at this size
Narrowest part1 mm at this size
Nodes516 curve and line segments

Measured from the file. PNG: 2,000 × 1,731 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.25 mm301 mm110Too fine for most machines
2 × 1.72 in (51 × 44 mm)0.51 mm603 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.58 in (76 × 66 mm)0.76 mm904 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.44 in (102 × 87 mm)1 mm1,206 mm6Vinyl, card and thin sheet
6 × 5.16 in (152 × 131 mm)1.5 mm1,809 mm2Vinyl, card and thin sheet
8 × 6.88 in (203 × 175 mm)2 mm2,412 mm1Vinyl, card and thin sheet
12 × 10.32 in (305 × 262 mm)3 mm3,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More highland cow SVG files

← Cute Highland cow calf face All 12 highland cows Highland cow monogram frame →