Free highland cow SVG

Highland cow outline SVG

Highland cow outline, drawn as a line
Highland cow outline. The preview is the SVG file itself.

The Highland cow face as a line drawing in one connected piece: the outline of horns, ears and shaggy cheeks, with the locks of the fringe, its ragged edge and the nose drawn inside. For foil, engraving and colouring.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 83 mm (3.94 × 3.25 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,510 mm at this size
Narrowest part1.3 mm at this size
Nodes686 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,663 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.33 mm384 mm110Too fine for most machines
2 × 1.65 in (51 × 42 mm)0.66 mm767 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.48 in (76 × 63 mm)0.99 mm1,151 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.3 in (102 × 84 mm)1.3 mm1,534 mm6Vinyl, card and thin sheet
6 × 4.95 in (152 × 126 mm)2 mm2,301 mm2Vinyl, card and thin sheet
8 × 6.6 in (203 × 168 mm)2.6 mm3,068 mm1Vinyl, card and thin sheet
12 × 9.9 in (305 × 251 mm)4 mm4,602 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More highland cow SVG files

← Highland cow monogram frame All 12 highland cows Layered Highland cow in four colours →