Free high heel SVG

Leopard print high heel boot SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leopard print high heel boot, as a solid black shape
Leopard print high heel boot. The preview is the SVG file itself.

A heeled ankle boot covered in leopard spots, broken rings with small dots between them, trimmed to leave a solid rim round the edge. Put gold or tan behind the holes.

What is in the file

Size100 × 100 mm (3.94 × 3.92 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut59: 1 outer edge and 58 cut-outs
Cut length1,177 mm at this size
Narrowest part1.4 mm at this size
Nodes593 curve and line segments

Measured from the file. PNG: 2,000 × 1,990 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.36 mm299 mm100Too fine for most machines
2 × 1.99 in (51 × 51 mm)0.71 mm598 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.99 in (76 × 76 mm)1.1 mm897 mm9Vinyl, card and thin sheet
4 × 3.98 in (102 × 101 mm)1.4 mm1,196 mm4Vinyl, card and thin sheet
6 × 5.97 in (152 × 152 mm)2.1 mm1,794 mm1Vinyl, card and thin sheet
8 × 7.96 in (203 × 202 mm)2.8 mm2,392 mm1Vinyl, card and thin sheet
12 × 11.94 in (305 × 303 mm)4.3 mm3,587 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More high heel SVG files

← Pair of high heels All 14 high heels Polka dot wedge high heel →