Free hibiscus SVG

Hibiscus leaf SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hibiscus leaf, as a solid black shape
Hibiscus leaf. The preview is the SVG file itself.

One toothed leaf with a pointed tip, its midrib and four pairs of side veins cut as slits that stop short of the edge, on a short stalk. Tuck a few behind any flower.

What is in the file

Size56 × 100 mm (2.2 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length819 mm at this size
Narrowest part1 mm at this size
Nodes124 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,150 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.25 mm208 mm160Too fine for most machines
1.12 × 2 in (28 × 51 mm)0.51 mm416 mm45Fine detail: vinyl and paper only, weed with care
1.67 × 3 in (43 × 76 mm)0.76 mm624 mm18Fine detail: vinyl and paper only, weed with care
2.23 × 4 in (57 × 102 mm)1 mm832 mm10Vinyl, card and thin sheet
3.35 × 6 in (85 × 152 mm)1.5 mm1,248 mm3Vinyl, card and thin sheet
4.46 × 8 in (113 × 203 mm)2 mm1,664 mm2Vinyl, card and thin sheet
6.7 × 12 in (170 × 305 mm)3 mm2,496 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hibiscus SVG files

← Hibiscus outline All 12 hibiscus flowers Hibiscus branch with a bud →