Free Hello 2027 SVG

Hello 2027 in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello 2027 in Pacifico, as a solid black shape
Hello 2027 in Pacifico. The preview is the SVG file itself.

“Hello 2027” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length1,061 mm at this size
Narrowest part3.1 mm at this size
Nodes250 curve and line segments

Measured from the file. PNG: 2,000 × 1,975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.79 mm269 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)1.6 mm539 mm25Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)2.4 mm808 mm9Vinyl, card and thin sheet
4 × 3.95 in (102 × 100 mm)3.1 mm1,078 mm4Any material, including 3 mm wood and acrylic
6 × 5.92 in (152 × 150 mm)4.7 mm1,617 mm1Any material, including 3 mm wood and acrylic
8 × 7.9 in (203 × 201 mm)6.3 mm2,156 mm1Any material, including 3 mm wood and acrylic
12 × 11.84 in (305 × 301 mm)9.4 mm3,234 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello 2027 SVG files

← Hello 2027 with two champagne flutes All 13 Hello 2027 designs Hello 2027 in Lobster →