Free Hello 2027 SVG

Hello 2027 in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello 2027 in Amatic SC, as a solid black shape
Hello 2027 in Amatic SC. The preview is the SVG file itself.

“Hello 2027” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size70 × 100 mm (2.75 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,119 mm at this size
Narrowest part1.4 mm at this size
Nodes309 curve and line segments

Measured from the file. PNG: 1,421 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.36 mm284 mm130Too fine for most machines
1.4 × 2 in (36 × 51 mm)0.71 mm568 mm35Fine detail: vinyl and paper only, weed with care
2.1 × 3 in (53 × 76 mm)1.1 mm853 mm15Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)1.4 mm1,137 mm8Vinyl, card and thin sheet
4.19 × 6 in (107 × 152 mm)2.1 mm1,705 mm2Vinyl, card and thin sheet
5.59 × 8 in (142 × 203 mm)2.8 mm2,274 mm2Vinyl, card and thin sheet
8.39 × 12 in (213 × 305 mm)4.3 mm3,411 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello 2027 SVG files

← Hello 2027 in Alfa Slab One All 13 Hello 2027 designs Hello 2027 in block capitals →