Free hedgehog SVG

Hedgehog outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hedgehog outline, drawn as a line
Hedgehog outline. The preview is the SVG file itself.

The hedgehog in profile as one even line: the spines along its back, the pointed face, an eye and two feet, with a zigzag where the spines stop. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 57 mm (3.94 × 2.23 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length721 mm at this size
Narrowest part1 mm at this size
Nodes319 curve and line segments

Measured from the file. PNG: 2,000 × 1,167 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.25 mm183 mm150Too fine for most machines
2 × 1.13 in (51 × 29 mm)0.51 mm366 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.7 in (76 × 43 mm)0.76 mm549 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.27 in (102 × 58 mm)1 mm733 mm8Vinyl, card and thin sheet
6 × 3.4 in (152 × 86 mm)1.5 mm1,099 mm3Vinyl, card and thin sheet
8 × 4.54 in (203 × 115 mm)2 mm1,465 mm2Vinyl, card and thin sheet
12 × 6.8 in (305 × 173 mm)3 mm2,198 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hedgehog SVG files

← Hedgehog under a toadstool All 12 hedgehogs Hedgehog with spines →