Free Happy Holidays SVG

Happy Holidays stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Holidays stencil plate, as a solid black shape
Happy Holidays stencil plate. The preview is the SVG file itself.

A rounded plate with “HAPPY HOLIDAYS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 66 mm (3.94 × 2.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,352 mm at this size
Narrowest part1.1 mm at this size
Nodes291 curve and line segments

Measured from the file. PNG: 2,000 × 1,352 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.28 mm343 mm140Too fine for most machines
2 × 1.33 in (51 × 34 mm)0.56 mm687 mm35Fine detail: vinyl and paper only, weed with care
3 × 1.99 in (76 × 51 mm)0.84 mm1,030 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.65 in (102 × 67 mm)1.1 mm1,374 mm8Vinyl, card and thin sheet
6 × 3.98 in (152 × 101 mm)1.7 mm2,060 mm2Vinyl, card and thin sheet
8 × 5.3 in (203 × 135 mm)2.2 mm2,747 mm2Vinyl, card and thin sheet
12 × 7.96 in (305 × 202 mm)3.4 mm4,121 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Holidays SVG files

← Happy Holidays outline lettering All 13 Happy Holidays designs Happy Holidays with a drop shadow →