Free Happy Holidays SVG

Happy Holidays in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Holidays in Amatic SC, as a solid black shape
Happy Holidays in Amatic SC. The preview is the SVG file itself.

“Happy Holidays” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces13 separate pieces
Outlines to cut19: 13 outer edges and 6 cut-outs
Cut length1,415 mm at this size
Narrowest part1.3 mm at this size
Nodes432 curve and line segments

Measured from the file. PNG: 2,000 × 1,658 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.33 mm359 mm110Too fine for most machines
2 × 1.64 in (51 × 42 mm)0.66 mm719 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.47 in (76 × 63 mm)0.99 mm1,078 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.29 in (102 × 84 mm)1.3 mm1,438 mm6Vinyl, card and thin sheet
6 × 4.93 in (152 × 125 mm)2 mm2,156 mm2Vinyl, card and thin sheet
8 × 6.58 in (203 × 167 mm)2.6 mm2,875 mm1Vinyl, card and thin sheet
12 × 9.86 in (305 × 251 mm)4 mm4,313 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Holidays SVG files

← Happy Holidays in Alfa Slab One All 13 Happy Holidays designs Happy Holidays in block capitals →