Free Happy Fathers Day SVG

Happy Fathers Day stencil plate SVG

Happy Fathers Day stencil plate, as a solid black shape — Happy Fathers Day stencil plate. The preview is the SVG file itself.

A rounded plate with “HAPPY FATHERS DAY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	16: 1 outer edge and 15 cut-outs
Cut length	1,307 mm at this size
Narrowest part	0.7 mm at this size
Nodes	221 curve and line segments

Measured from the file. PNG: 2,000 × 1,244 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 15 mm)	0.18 mm	332 mm	150	Too fine for most machines
2 × 1.21 in (51 × 31 mm)	0.36 mm	664 mm	40	Too fine for most machines
3 × 1.82 in (76 × 46 mm)	0.53 mm	996 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.43 in (102 × 62 mm)	0.71 mm	1,328 mm	8	Fine detail: vinyl and paper only, weed with care
6 × 3.64 in (152 × 93 mm)	1.1 mm	1,992 mm	3	Vinyl, card and thin sheet
8 × 4.86 in (203 × 123 mm)	1.4 mm	2,656 mm	2	Vinyl, card and thin sheet
12 × 7.28 in (305 × 185 mm)	2.1 mm	3,984 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Fathers Day SVG files

← Happy Fathers Day outline lettering All 12 Happy Fathers Day designs Happy Fathers Day with a drop shadow →