Free Happy Fathers Day SVG

Happy Fathers Day in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Fathers Day in Amatic SC, as a solid black shape
Happy Fathers Day in Amatic SC. The preview is the SVG file itself.

“Happy Fathers Day” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 62 mm (3.94 × 2.46 in), scales to any size
Pieces15 separate pieces
Outlines to cut22: 15 outer edges and 7 cut-outs
Cut length1,223 mm at this size
Narrowest part1 mm at this size
Nodes453 curve and line segments

Measured from the file. PNG: 2,000 × 1,277 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.25 mm311 mm140Too fine for most machines
2 × 1.25 in (51 × 32 mm)0.51 mm621 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 48 mm)0.76 mm932 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.5 in (102 × 63 mm)1 mm1,243 mm8Vinyl, card and thin sheet
6 × 3.74 in (152 × 95 mm)1.5 mm1,864 mm3Vinyl, card and thin sheet
8 × 4.99 in (203 × 127 mm)2 mm2,485 mm2Vinyl, card and thin sheet
12 × 7.49 in (305 × 190 mm)3 mm3,728 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Fathers Day SVG files

← Happy Fathers Day in Alfa Slab One All 13 Happy Fathers Day designs Happy Fathers Day in block capitals →