Free Happy Easter SVG

Happy Easter stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Easter stencil plate, as a solid black shape
Happy Easter stencil plate. The preview is the SVG file itself.

A rounded plate with “HAPPY EASTER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 72 mm (3.94 × 2.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,368 mm at this size
Narrowest part1.4 mm at this size
Nodes290 curve and line segments

Measured from the file. PNG: 2,000 × 1,452 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.36 mm347 mm130Too fine for most machines
2 × 1.43 in (51 × 36 mm)0.71 mm695 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.14 in (76 × 54 mm)1.1 mm1,042 mm15Vinyl, card and thin sheet
4 × 2.86 in (102 × 73 mm)1.4 mm1,390 mm6Vinyl, card and thin sheet
6 × 4.29 in (152 × 109 mm)2.1 mm2,085 mm2Vinyl, card and thin sheet
8 × 5.72 in (203 × 145 mm)2.8 mm2,780 mm2Vinyl, card and thin sheet
12 × 8.58 in (305 × 218 mm)4.3 mm4,170 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Easter SVG files

← Happy Easter outline lettering All 13 Happy Easter designs Happy Easter with a drop shadow →