Free Happy Easter SVG

Happy Easter in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Easter in Kaushan Script, as a solid black shape
Happy Easter in Kaushan Script. The preview is the SVG file itself.

“Happy Easter” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces11 separate pieces
Outlines to cut13: 11 outer edges and 2 cut-outs
Cut length1,272 mm at this size
Narrowest part1.4 mm at this size
Nodes449 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.36 mm323 mm120Too fine for most machines
2 × 1.52 in (51 × 39 mm)0.71 mm646 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)1.1 mm969 mm12Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)1.4 mm1,292 mm6Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)2.1 mm1,939 mm2Vinyl, card and thin sheet
8 × 6.08 in (203 × 154 mm)2.8 mm2,585 mm1Vinyl, card and thin sheet
12 × 9.12 in (305 × 232 mm)4.3 mm3,877 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Easter SVG files

← Happy Easter in Lobster All 13 Happy Easter designs Happy Easter in Lilita One →