Free Happy Anniversary SVG

Happy Anniversary stencil plate SVG

Happy Anniversary stencil plate, as a solid black shape — Happy Anniversary stencil plate. The preview is the SVG file itself.

A rounded plate with “HAPPY ANNIVERSARY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 60 mm (3.94 × 2.37 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	17: 1 outer edge and 16 cut-outs
Cut length	1,352 mm at this size
Narrowest part	0.6 mm at this size
Nodes	232 curve and line segments

Measured from the file. PNG: 2,000 × 1,233 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.6 in (25 × 15 mm)	0.15 mm	343 mm	150	Too fine for most machines
2 × 1.2 in (51 × 31 mm)	0.3 mm	687 mm	40	Too fine for most machines
3 × 1.8 in (76 × 46 mm)	0.46 mm	1,030 mm	18	Too fine for most machines
4 × 2.4 in (102 × 61 mm)	0.61 mm	1,374 mm	8	Fine detail: vinyl and paper only, weed with care
6 × 3.61 in (152 × 92 mm)	0.91 mm	2,060 mm	3	Fine detail: vinyl and paper only, weed with care
8 × 4.81 in (203 × 122 mm)	1.2 mm	2,747 mm	2	Vinyl, card and thin sheet
12 × 7.21 in (305 × 183 mm)	1.8 mm	4,121 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Anniversary SVG files

← Happy Anniversary outline lettering All 12 Happy Anniversary designs Happy Anniversary with a drop shadow →