Happy Anniversary in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Anniversary” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 37 mm (3.94 × 1.46 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 23: 17 outer edges and 6 cut-outs |
| Cut length | 729 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 290 curve and line segments |
Measured from the file. PNG: 2,000 × 790 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.37 in (25 × 9 mm) | 0.51 mm | 185 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.74 in (51 × 19 mm) | 1 mm | 370 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.11 in (76 × 28 mm) | 1.5 mm | 555 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.48 in (102 × 38 mm) | 2 mm | 741 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.23 in (152 × 57 mm) | 3 mm | 1,111 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.97 in (203 × 75 mm) | 4.1 mm | 1,481 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.45 in (305 × 113 mm) | 6.1 mm | 2,222 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Anniversary SVG files
-
Happy Anniversary in Alfa Slab One Solid · 17 pieces
-
Happy Anniversary in Amatic SC Solid · 16 pieces
-
Happy Anniversary in block capitals Solid · 16 pieces
-
Happy Anniversary in script and capitals Solid · 12 pieces
-
Happy Anniversary with hearts Solid · 16 pieces
-
Happy Anniversary outline lettering Outline · 17 pieces
-
Happy Anniversary stencil plate Solid · one piece
-
Happy Anniversary with a drop shadow Layered · 6 pieces
← Happy Anniversary in Kaushan Script All 13 Happy Anniversary designs Happy Anniversary in Alfa Slab One →