Free hairdresser SVG

Layered hairdresser barber pole SVG

Layered hairdresser barber pole, in layered colours — Layered hairdresser barber pole. The preview is the SVG file itself.

Four layers to stack: a charcoal pole with its caps and balls, a white tube, then the red stripes and the blue stripes, which take turns up the tube.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	29 × 100 mm (1.13 × 3.94 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	7 outlines
Cut length	588 mm at this size
Narrowest part	3.6 mm at this size
Nodes	65 curve and line segments
Layers	4: pole, tube, red and blue

Measured from the file. PNG: 627 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.29 × 1 in (7 × 25 mm)	0.91 mm	149 mm	250	Fine detail: vinyl and paper only, weed with care
0.57 × 2 in (15 × 51 mm)	1.8 mm	299 mm	75	Vinyl, card and thin sheet
0.86 × 3 in (22 × 76 mm)	2.7 mm	448 mm	33	Vinyl, card and thin sheet
1.14 × 4 in (29 × 102 mm)	3.7 mm	597 mm	18	Any material, including 3 mm wood and acrylic
1.72 × 6 in (44 × 152 mm)	5.5 mm	896 mm	6	Any material, including 3 mm wood and acrylic
2.29 × 8 in (58 × 203 mm)	7.3 mm	1,195 mm	4	Any material, including 3 mm wood and acrylic
3.43 × 12 in (87 × 305 mm)	11 mm	1,792 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hairdresser SVG files

← Hairdresser scissors outline All 15 hairdressers Hairdresser scissors →