Free Groom SVG

Groom with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Groom with stars, as a solid black shape
Groom with stars. The preview is the SVG file itself.

“Groom” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length844 mm at this size
Narrowest part1.6 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 18 mm)0.41 mm214 mm130Too fine for most machines
2 × 1.38 in (51 × 35 mm)0.81 mm429 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.08 in (76 × 53 mm)1.2 mm643 mm15Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)1.6 mm858 mm8Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)2.4 mm1,286 mm2Vinyl, card and thin sheet
8 × 5.54 in (203 × 141 mm)3.3 mm1,715 mm2Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)4.9 mm2,573 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Groom SVG files

← Groom with a swash underline All 13 Groom designs Groom outline lettering →